Construction Cost Estimates for Car Dealership in National, US
The following analysis estimates the cost to build a car dealership using US National Average costs from 2013 RSMeans cost data. Costs are derived from a building model that assumes basic components, using union labor for a
21000 square foot building.
Scope differences and market conditions can cause costs to vary significantly. To see an estimate of the costs to build a car dealership in a specific city or metropolitan area, go to our index of car dealership models by state.
NOTE: This cost estimate uses 2013 RSMeans data. A more accurate estimate using current RSMeans cost data is available on Construction Estimating Software
Try Free For 30 Days
| Car Dealership Construction Cost Assumptions |
| Location: |
US National Average
|
| Stories: |
1
|
| Story Height (L.F.): |
14.00
|
| Floor Area (S.F.): |
21000
|
| Basement Included: |
No
|
| Data Release: |
Year 2013
|
|
Car Dealership Square Foot Cost Assuming E.I.F.S. on Concrete Block / Steel Frame
| Cost Estimate (Union Labor) |
% of Total |
Cost Per SF |
Cost |
| Total |
|
$88.33 |
$1,855,000 |
| Contractor Fees (GC,Overhead,Profit) |
25% |
$22.08 |
$463,800 |
| Architectural Fees |
7% |
$7.73 |
$162,300 |
| Total Building Cost |
$118.15 |
$2,481,100 |
| Cost Estimate (Open Shop) |
% of Total |
Cost Per SF |
Cost |
| Total |
|
$81.60 |
$1,713,500 |
| Contractor Fees (GC,Overhead,Profit) |
25% |
$20.40 |
$428,400 |
| Architectural Fees |
7% |
$7.14 |
$149,900 |
| Total Building Cost |
$109.13 |
$2,291,800 |
OTHER OPTIONS:
Car Dealership Square Foot Cost Assuming Face Brick with Concrete Block Back-up / Bearing Walls
Car Dealership Square Foot Cost Assuming Face Brick with Concrete Block Back-up / Steel Frame
Car Dealership Square Foot Cost Assuming Stucco on Concrete Block / Bearing Walls
Car Dealership Square Foot Cost Assuming Stucco on Concrete Block / Steel Frame
Car Dealership Square Foot Cost Assuming Tilt-up Concrete Wall / Steel Frame
